CCIE Enterprise Infra Bootcamp Training

CCIE Enterprise Infra Bootcamp Training

Overview

Cisco Certified Internetwork Expert or CCIE Enterprise Infra Bootcamp is a far-famed certification by Cisco proving complicated enterprise infrastructure solution skills of a professional. As it is an expert level certification, the candidate has to clear two different exams to attain the certification. 7NetworkServices offers CCIE Enterprise Infra Bootcamp training where we give the right knowledge and guidance to help students in clearing the examination.

This course by 7NetworkServices covers both theoretical as well as practical aspects of learning the technology. Here the students will be taking online classes for training. Online training allows us to train students from numerous parts of the world who want to master this technology. Our motive is to let every candidate know the complex concepts of CCIE Enterprise Infrastructure so that they can perform on their job. 7NetworkServices prepare their candidates not only for the examination but for situations that they can face on their job.

What You Will Learn in CCIE Enterprise Infra Bootcamp Training?

  • Network Infrastructures
  • VLAN Pruning
  • Voice VLAN
  • Enhanced Interior Gateway Routing Protocol
  • Graceful Shutdown
  • EIGRP Load Balancing
  • IP FRR
  • Generic TTL Security Mechanism
  • Private AS
  • Best Path Selection Algorithm
  • AS Path Manipulations
  • Route Reflector
  • Route Refresh
  • IGMP Querier
  • MLD
  • Reverse Path Forwarding Check
  • Source-Specific Multicast
  • PIMv6 Anycast RP
  • Designing Cisco SD-Access Solution

CCIE Enterprise Infra Bootcamp Course Curriculum

Network Infrastructure

  • Switched campus
  • Switch administration
  • Managing MAC address table
  • Errdisable recovery
  • L2 MTU
  • Layer 2 protocols
  • CDP, LLDP
  • UDLD
  • VLAN technologies
  • Access ports
  • Trunk ports (802.1Q)
  • Native VLAN
  • Manual VLAN pruning
  • VLAN database
  • Normal range and extended range VLANs
  • Voice VLAN
  • VTP
  • EtherChannel
  • LACP, static
  • Layer 2, Layer 3
  • Load balancing
  • EtherChannel Misconfiguration Guard
  • Spanning Tree Protocol
  • PVST+, Rapid PVST+, MST
  • Switch priority, port priority, path cost, STP timers
  • PortFast, BPDU Guard, BPDU Filter
  • Loop Guard, Root Guard

Routing Concepts

  • Administrative distance
  • VRF-lite
  • Static routing
  • Policy-Based Routing
  • VRF-aware routing with any routing protocol
  • Route filtering with any routing protocol
  • Manual summarization with any routing protocol
  • Redistribution between any pair of routing protocols
  • Routing protocol authentication
  • Bidirectional Forwarding Detection

EIGRP-Enhanced Interior Gateway Routing Protocol

  • Adjacencies
  • Best path selection
  • RD, FD, FC, successor, feasible successor
  • Classic Metrics and Wide Metrics
  • Operations
  • General operations
  • Topology table
  • Packet types
  • Stuck In Active
  • Graceful shutdown
  • EIGRP load balancing
  • Equal-cost
  • Unequal-cost
  • Add-path
  • EIGRP Named Mode
  • Optimization, convergence and scalability
  • Fast convergence requirements
  • Query propagation boundaries
  • IP FRR (single hop)
  • Leak-map with summary routes
  • EIGRP stub with leak map

OSPF (v2 and v3)

  • Adjacencies
  • Network types, area types
  • Path preference
  • Operations
  • General operations
  • Graceful shutdown
  • GTSM (Generic TTL Security Mechanism)
  • Optimization, convergence and scalability
  • Metrics
  • LSA throttling, SPF tuning, fast hello
  • LSA propagation control (area types)
  • Stub router
  • Loop-free alternate
  • Prefix suppression

BGP -Border Gateway Protocol

  • IBGP and EBGP peer relationships
  • Peer-group/update-group, template
  • Active, passive
  • Timers
  • Dynamic neighbors
  • 4-byte AS numbers
  • Private AS
  • Path selection
  • Attributes
  • Best path selection algorithm
  • Load balancing
  • Routing policies
  • Attribute manipulation
  • Conditional advertisement
  • Outbound Route Filtering
  • Standard and extended communities
  • Multi-homing
  • AS path manipulations
  • local-as, allowas-in, remove-private-as
  • Prepend
  • Regexp
  • Convergence and scalability
  • Route reflector
  • Aggregation, as-set
  • Other BGP features
  • Multipath, add-path
  • Soft reconfiguration, Route Refresh

Multicast

  • Layer 2 multicast
  • IGMPv2, IGMPv3
  • IGMP Snooping, PIM Snooping
  • IGMP Querier
  • IGMP Filter
  • MLD
  • Reverse path forwarding check
  • PIM
  • Sparse Mode
  • Static RP, BSR, AutoRP
  • Group to RP Mapping
  • Bidirectional PIM
  • Source-Specific Multicast
  • Multicast boundary, RP announcement filter
  • PIMv6 Anycast RP
  • IPv4 Anycast RP using MSDP
  • Multicast multipath

Software-Defined Infrastructure

  • Cisco SD-Access
  • Design a Cisco SD-Access solution
  • Underlay network (IS-IS, manual/PnP)
  • Overlay fabric design (LISP, VXLAN, Cisco TrustSec)
  • Fabric domains (single-site and multi-site using SD-WAN transit)
  • Cisco SD-Access deployment
  • Cisco DNA Center device discovery and device management
  • Add fabric node devices to an existing fabric
  • Host onboarding (wired endpoints only)
  • Fabric border handoff
  • Segmentation
  • Macro-level segmentation using VNs
  • Micro-level segmentation using SGTs (using Cisco ISE)
  • Assurance
  • Network and client health (360)
  • Monitoring and troubleshooting

Cisco SD-WAN

  • Design a Cisco SD-WAN solution
  • Orchestration plane (vBond, NAT)
  • Management plane (vManage)
  • The control plane (vSmart, OMP)
  • Data plane (vEdge/cEdge)
  • WAN edge deployment
  • Onboarding new edge routers
  • Orchestration with zero-touch provisioning/Plug-And-Play
  • OMP
  • TLOC
  • Configuration templates
  • Localized policies (only QoS)
  • Centralized policies
  • Application Aware Routing
  • Topologies

Transport Technologies and Solutions

  • MPLS
  • Operations
  • Label stack, LSR, LSP
  • LDP
  • MPLS ping, MPLS traceroute
  • L3VPN
  • PE-CE routing
  • MP-BGP VPNv4/VPNv6
  • Extranet (route leaking)

DMVPN

  • Troubleshoot DMVPN Phase 3 with dual-hub
  • NHRP
  • IPsec/IKEv2 using a pre-shared key
  • Per-Tunnel QoS
  • Identify use-cases for FlexVPN
  • Site-to-Site, Server, Client, Spoke-to-Spoke
  • IPsec/IKEv2 using a pre-shared key
  • MPLS over FlexVPN

Infrastructure Security and Services

  • Device Security on Cisco IOS XE
  • Control plane policing and protection
  • AAA

Network Security

  • Switch security features
  • VACL, PACL
  • Storm control
  • DHCP Snooping, DHCP option 82
  • IP Source Guard
  • Dynamic ARP Inspection
  • Port Security
  • Private VLAN
  • Router security features
  • IPv6 Traffic Filters
  • IPv4 Access Control Lists
  • Unicast Reverse Path Forwarding
  • IPv6 infrastructure security features
  • RA Guard
  • DHCP Guard
  • Binding table
  • Device tracking
  • ND Inspection/Snooping
  • Source Guard
  • IEEE 802.1X Port-Based Authentication
  • Device roles, port states
  • Authentication process
  • Host modes

System Management

  • Device management
  • Console and VTY
  • SSH, SCP
  • RESTCONF, NETCONF
  • SNMP
  • v2c
  • v3
  • Logging
  • Local logging, Syslog, debugs, conditional debugs
  • Timestamps

Quality of Service

  • End to end L3 QoS using MQC
  • DiffServ
  • CoS and DSCP Mapping
  • Classification
  • Network-Based Application Recognition (NBAR)
  • Marking using IP Precedence, DSCP, CoS
  • Policing, shaping
  • Congestion management and avoidance
  • HQoS, Sub-rate Ethernet Link
  • Network Services
  • First Hop Redundancy Protocols
  • HSRP, GLBP, VRRP
  • Redundancy using IPv6 RS/RA
  • Network Time Protocol
  • Master, client
  • Authentication
  • DHCP on Cisco IOS
  • Client, server, relay
  • Options
  • SLAAC/DHCPv6 interaction
  • Stateful, stateless DHCPv6
  • DHCPv6 Prefix Delegation
  • IPv4 Network Address Translation
  • Static NAT, PAT
  • Dynamic NAT, PAT
  • Policy-based NAT, PAT
  • VRF-aware NAT, PAT
  • IOS-XE VRF-Aware Software Infrastructure (VASI) NAT

Network optimization

  • IP SLA
  • ICMP probes
  • UDP probes
  • TCP probes
  • Tracking object
  • Flexible NetFlow
  • Network operations
  • Traffic capture
  • SPAN
  • RSPAN
  • ERSPAN
  • Embedded Packet Capture
  • Cisco IOS-XE troubleshooting tools
  • Packet Trace
  • Conditional debugger (debug platform condition)

Infrastructure Automation and Programmability

  • Data encoding formats
  • JSON
  • XML
  • Automation and scripting
  • EEM applets
  • Guest shell
  • Linux environment
  • CLI Python module
  • EEM Python module
  • Programmability
  • Interaction with vManage API
  • Python requests library and Postman
  • Monitoring endpoints
  • Configuration endpoints
  • Interaction with Cisco DNA Center API
  • HTTP request (GET, PUT, POST) via Python requests library and Postman
  • Interaction with Cisco IOS XE API
  • Via NETCONF/YANG using Python ncclient library
  • Via RESTCONF/YANG using Python requests library and Postman
  • Deploy and verify model-driven telemetry
  • Configure on-change subscription using gRPC

Who Should Take This Course?

This course is made for all those professionals who have CCNP skills but want to attain expert-level knowledge. Additionally, CCIE Enterprise Infra Bootcamp training can be taken by anyone who is struggling to clear this certification examination.

Mode of CCIE Enterprise Infra Bootcamp Training

7NetworkServices hosts online training for CCIE Enterprise Infra Bootcamp Certification. During online classes, our expert trainers segregate theory and practice in a perfect balance to provide the best knowledge to the candidate. Upon completion of the online training for this course, the candidate will be ready to clear the certification examination. The primary reason for having online classes for this expert level course is that there are students from numerous regions of the planet. Providing training in a physical institute will act as a hurdle to all such candidates who may struggle to travel across the land for training. With that thing in mind, 7NetworkServices provides CCIE Enterprise Infra Bootcamp training in the US, UK, China, Japan, Russia, India, Philippines, Canada, Oman, UAE, Kenya, South Africa, Germany, New Zealand, Italy, Spain, and many other parts of the world.

Prerequisites Required for CCIE Enterprise Infra Bootcamp Training

CCIE Enterprise Infra Bootcamp certification does not need any prior certification or formal prerequisite. However, having at least five years of experience in deploying, operating, and designing enterprise networking might help in getting a better result from this training.  

Highlights of CCIE Enterprise Infra Bootcamp Training and Certification Course

  • Only certified training with several years of industry experience
  • Pick any type of training you want; be it classroom training or online training
  • Prepare yourself for the job interviews with the interview training included in every course
  • Practice your training with 24X7 access to our labs                                 
  • Manage your time better by choosing either weekend or regular classes
  • Hands-on Experience on genuine equipment for enhanced understanding

Reasons to Consider 7Network As Your Training Partner

  • 24*7 Online Access Guidance for Working Professionals
  • Only Real Equipment and No Simulator Used
  • Experienced Professional Instructor.
  • 100% Placement Assurance to Each and Every Candidate
  • Flexible Batch Timings 7-Days (8:00 AM To 10:30 PM)
  • Trusted By 12,000+ Students And 200 + Colleges.
  • Join7NetworkServices Take Your Career from Associate to Higher Level
  • Live Virtual Online Classes

Subscribe Our Newsletter

For new awesome courses & special promotion campaign!

Callback